- 1) Motion Sensor Light Socket:The motion sensor does very well in detecting when someone is approaching. It has three adjustment: With Time Button adjustment can set the duration for which it will be "on", With Sens Button adjustment can set the sensitivity(don't need to adjust generally),With Lux Button adjustment can adjust the light to work all day or only at night(Turn LUX knob to SUN position, it will work in daylight and at night, Turn LUX knob to Moon position,it will only work at night).
- 2) Adjustable Motion Sensor Head: the Motion Sensor Head can be adjusted 160 °left and right, and also can be adjusted 160 °front and back, so you can position the light socket where you need it most.
- 3) Applicable Light Socket: This motion sensor light bulb socket is suitable for all E26/E27 screw on illuminates, it can convert your ordinary light bulb into an infrared sensor light. Maximum power is less than 100W & maximum voltage is AC110V-240V.
- 4) Easy Installation in an Existing Socket - The motion sensor socket automatically turns the light on when you enter and off when you exit the room and installs just like a light bulb.
- 5) Wide Application: the motion sensor light socket are perfect for laundry rooms, basements, attics, garages,stairs and corridors etc,suitable for various demands in your daily life.
Specifications:
Material: Flame-retardant ABS Metal
Base Type: E26/E27
Power Source: 110-240V/AC
Power Frequency:50/60Hz
Rated Load:<100W Max.
Detection Distance: 8M max
Time-Delay: Min.5sec±2sec
Max.8min±2min (adjustable)
Ambient Light: 2-2000 LUX (adjustable)
Installation Height: 1.8m-2.5m
Package Included:
2 x E27 Motion Activeted Light Socket
Installation: Simply install in an existing light socket (indoor only) and then screw bulb into the fixture, no tools needed. Then your lamp will
become a Motion Sensor Light Socket.
Time Button: Time Button adjustment can set the duration for which it will be "on", “－” means short time, and “ ” means long time, but
the minimum time is 5sec±2sec, the maximum time is 8min±2min,
Sens Button: Sens Button adjustment can set the sensitivity, and it doesn't need to adjust generally, but if your bulb would be always on because
of the high sensitivity, you should adjust the Sens Button to the “－” position;
Lux Button: Lux Button adjustment can adjust the light to work all day or only at night, Turn LUX knob to SUN position, it will work in daylight and
at night, Turn LUX knob to Moon position,it will only work at night.
NOTES:
1) Can be only used indoor, and the Motion Sensor Ball must be installed Fix Downward Only.
2) It can't work in any lamp shade, So Please do not fix the socket into an enclosed lampshade,or the glass shade will block the sensor.
3) Its working temperature is -4F-104F, if the weather is too cold or too hot, the sensor may not work well, Please take care of this before buying!!
